Back To Top

NC33 Electrical panel switches

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #71597
    Bruce Goldman
    Participant

    The Fresh Water switch on the electrical panel in my 1989 NC33 loses its connection. The button has lost its “spring.” The panel was made by Ensto. That company appears to not produce consumer products anymore.
    Has anyone found suitable replacements for individual switches on a 30 year old electrical panel?

    #71902
    Rose-Anne Briggs
    Participant

    If you have a panel with spare, unused switches on it, as I do on my 1990 NC33mk2, why not change onto one of the free ones? Sorry if your panel is not the same as mine.

    #71910
    Bruce Goldman
    Participant

    Thank you for your reply. Yes, I will most likely repurpose a switch to accommodate this one. But I fear that as goes one eventually will go all. I’d like to delay the inevitable complete replacement, hopefully for long enough that it will be on the next owner’s to-do list instead of one more thing on mine.

    #72016
    Manuel Rodríguez
    Participant

    In My Nauticat 33 every switch has two places where you can place the conectors. I mean, every switch has two mechanical switches inside, you only have to change the cables from left pins to right pins.

    Sorry for my english.

    Manuel

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.