331 Ertec hatch – 'perspex' replacement

This topic has 2 replies, 2 voices, and was last updated 6 years, 2 months ago by Alasdair Woodfield.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
16th July 2018 at 9:48 pm #36756

Alasdair Woodfield
Participant

I have an Ertec deck hatch that will need either perspex or rplacement, I would appreciate some advise.

It looks like it is possible to take the hatch lid apart to replace the ‘perspex’, has anyone got experience of doing this and how did they source the plastic ?

Ertec/NC Borg do not appear to manufacture the circa 2006 hatches has anyone sourced a suitable replacement ?

Looking forward to replies.

Alasdair

17th July 2018 at 7:07 am #37418

Piers Covill
Keymaster

If you are after a replacement hatch it’s worth checking directly with ERTEC to confirm, but it sounds like you have done this.

There are several hatch and window renovation companies that would be worth speaking to. Try https://www.seaclear.co.uk or project plastics on project.plastics@btinternet.com 01206 868696.

28th July 2018 at 4:54 pm #38259

Alasdair Woodfield
Participant

Many thanks for the suggestions, I’ll investigate.
Alasdair
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.